1.6 Tonne Extra Heavy Duty Sliding Gate Opener Jumbo Kit

AU $1,088.00AU $870.00

Product Code: APC-SG1600AC-JK

Extra Heavy Duty
AC Sliding Gate Automation System
Easy Installation All in one Motor and Control Panel for Sliding Gate
Suitable for sliding gates up to 1600kg

 
AC Sliding Gate Automation System

Jumbo KIT
Package Contents


- 1 x AC Motor with built in Control Panel
- 3 x Remote Controls
- 1 x Set of PE Safety Sensors
- 10m 4 Core Cable for Sensors
- 1 x Entry Push Button Switch
- 1 x Exit Push Button Switch
- 1 x 10m 2 Core Cable for Push Button Switches
- 5m Nylon Coated Gear Rack (can be upgraded to steel gear rack at an additional cost)
- 2 x Manual Override Keys
- 1 x Metal Gate Stop
- 1 x Metal "U" Guide
- 1 x Motor Mounting Base plate & Bolts
- 1 x Set of Limit Strikers
- 1 x Instruction Manual
 
Strong & Durable
Strong & Durable Sliding gate motor with 1600KG capacity
All In One Motor
All in one motor with built in control board and limit switches
AC Sliding Gate Automation System
AC Sliding Gate Automation System
Manual Override
Built in manual override for emergencies
Metal Pinnion & Gears (NO PLASTIC OR NYLON)
Strong Metal Cut Pinnion ensuring the highest durability
AC Sliding Gate Automation System
AC Sliding Gate Automation System
 

This all in one AC powered sliding gate motor kit is designed to operate sliding gates up to 1600kg in weight. It is an all in one motor and control panel, making it simple to install and extremely compact and neat.

✓ Manual Override
✓ All Metal Gears
✓ Metal Gear Drive
✓ All in one internal Motor and Control Panel

Controlling Options:

(any or all of the following may be connected to operate the gate)

- Remote Controls (2 supplied - more available upon request)
- Wireless or Wired Entry push button switch (Available as an optional accessory)
- Wireless or Wired Exit push button switch (Available as an optional accessory)
- Wireless or Wired Keypads (Available as an optional accessory)
- Safety Photoelectric Sensors (supplied - more available upon request)
- Intercom system with dry contact output (Available as an optional accessory)
- GSM receiver with seperate power supply (Available as an optional accessory)
- Wi-Fi receiver with seperate power supply (Available as an optional accessory)
- Loop Detector (Available as an optional accessory)

 
Motor Dimensions
 
AC Sliding Gate Automation System
 
Remote Control
  
AC Sliding Gate Automation System Remote Control
Rolling code 433.92MHZ.
The remotes supplied have 4 buttons, 1 and 2 can be used for the gates. Buttons 3 and 4 can be used for the party mode and second lock or alternatively they can be programmed to a compatible second gate opener or a garage door(s). A compatible 2 channel reciever is available to interface to any garage doors. Please see remotes and recievers in our store to find this add on reciever for the garage door.
 
Safety Sensors
 
AC Sliding Gate Automation System Safety Sensors
Photo electric sensor function:
If PE sensors are installed:
- The gate will not close while the beam is obstructed.
- The gate will stop and re-open if an object obstructs the beam.
The sensors are wired back to the control panel using the supplied cables.
Specifications:
Detection technology: Infrared
Range: 15m max.
Frequency: 1.92Khz
Power: 12-24V AC/DC
Input: RX 15mA, TX 30mA
Operating temperature: -20 to 70 degrees
Relay output: 1Amp max 30V
Dimension: 49.2 x 76 21mm
 
Entry Push Button Switch
 
Entry Push Button Switch
Low Voltage Single Push Button Switch with isolation key switch for operating automatic gates or garage opening systems. This switch can be wired to operate any device requiring momentary switching (switch is closed while pressed and open when not pressed).
 
Exit Push Button Switch
 
Exit Push Button Switch
Low Voltage Single Push Button Switch with isolation key switch for operating automatic gates or garage opening systems. This switch can be wired to operate any device requiring momentary switching (switch is closed while pressed and open when not pressed).
 
Gate Stop
 
AC Sliding Gate Automation System Gate Stop
Gate Stop

Heavy duty galvanised metal gate stop with rubber end.
 
"U" Guide
 
AC Sliding Gate Automation System U Guide
"U" Guide and stop for sliding gates

The "U" Guide is installed at the closing end of the sliding gate.
 
GR-52-V3 Interlocking 520mm Lengths Nylon Coated Gear Rack
 
AC Sliding Gate Automation System GR-52-V3 Interlocking 520mm Lengths Nylon Coated Gear Rack
520mm Lengths Nylon Coated Gear Rack

This GR-52-V3 gear rack is nylon coated and re-inforced with a steel rod. The gear rack is supplied in 520mm interlocking lengths with a male and female end.
More gear rack is available for purchase for larger sliding gates.
Please Note: This nylon gear rack can be upgraded to steel gear rack at an additional cost.
 
Suitability
 
This automatic sliding gate opener is suitable for:
→ Sliding gate not exceeding 1600kg maximum
→ A power point at the gate
→ Level ground installations
 
Specifications
 
Rated Power650W
Power supply220V-240V
Maximum Weight of Gate1600kg
Working temperature of motor-45° ~ +65°
Open (Close) speed12m/min
Maximum Pull38Nm
Voltage outputOnly devices with a parameter of 12-24V DC operating range can be connected to the system
Light output240V Light, 30 Watts or Less
Accessories inputOpen Only
Close Only
Open/Stop/Close
 
 
AC Sliding Gate Automation System
Here are the Commonly FAQ asked about this product
Can I operate this sliding gate motor manually?
YES
The motor is fitted with a manual override and supplied with a key to manually disengage the motor
Can I use this system to operate a large gate?
YES
This motor can handle a sliding gate up to 1600kg's in weight
Are the motor & control panel all in one?
YES
Both the motor and the control panel are housed under one casing making the motor easy to install and very neat & compact
Can I use push buttons to operate this system?
YES
Both wireless & wired push button switches can be used to open/close the gate motor
Can I use keypads to operate this system?
YES
Both wireless & wired keypads can be used to open/close the gate motor
Can I connect a safety sensor to this system?
YES
Photoelectric and reflective safety sensors can be connected to this system to stop the gate from closing if there is a vehicle or person in the way of the gate
Can I connect an intercom system to this gate system?
YES
A range of different intercoms can be connected to this system allowing the intercom to unlock the gate motor from a monitor inside the house or via an app on your smart phone
Can I operate this gate system from a remote location?
YES
A GSM Receiever or Wi-Fi Receiver can be connected to the system allowing programmed users to open/close the gate system from a remote location. Please note, to connect these accessories to the system a seperate power pack must be used.
Does this gate system automatically close?
YES
When the automatic close timer is enabled and photoelectric safety sensors are installed the gate will automatically close
Can I connect a light to the system?
YES
The system has a 240V light output meaning a 240V light 30 Watts or less can be connected and will operate when the gate is opening/closing.
Can I lock my gate if I go away?
YES
This system has a LOCK-OUT feature where the user can press button number 4 on any of the programmed remote controls to disable all wireless/wired accessories until button 3 is pressed on the remote to enable the system.
AC Sliding Gate Automation System

Remember, You are welcome to ask more questions! You can always rely on Automotionplus for quality products and great service, we are only a phone call away or please visit our showroom.

 
 
Prices & GST: All Prices includes GST.
 
Delivery: All products are delivered via Australia post couriers. The products will be registered and insured.
The purchased product will be dispatched immediately on the day of purchase if the order and payment is completed before 12pm otherwise it will be dispatched the following day.
 
Pickup:Customers can pickup the automatic gate opener from our factory/showroom.
 
Warranty: All products supplied are pre-tested, long lasting and are excellent quality with a 12 Months back to base warranty on the complete system.